Automatic Color Pavement Block Making Machine Hydraulic Compressed Cement Brick Making Machine Hollow Block Machine with Servo Motor Vibration Factory Price

• Certification: ISO
• Customized: Customized
• Automatic Grade: Automatic
• Type: Vibration Molding
• Hollow Block 40X15X20cm: 12 PCS Per Drop
• Vibration: Servo Motor Vibration
• Model NO.: HWG-1000
• Pallet Size: 1100-1150 X 950mm
• Rectangle Paver: 36PCS Per Drop
• Weight of Main Machine: 12 Ton
• Color of Machine: Blue &White or Grey&Yellow or Customized
• Paver Strength: 30-50MPa
• Factory Area: 4000-5000 Square Meters
• Plant Power: 120kw Including Batching Machine and Mixer
• Man Power: 5-6 Labors
• Transport Package: Standard Ocean Packing
• Trademark: HAWEN
• Origin: China
• HS Code: 8474809090
• Production Capacity: 300 Sets/ Year

Product Description

Germany Automatic Concrete Block Brick Making Machine For Building Material 
Company Information


Hawen Machinery is the leading manufacturer of concrete machinery and plant,with ISO9001 Certificate,with quality and service,  Hawen Machinery are not only distributed and found in use all around China, but also in different countries wordwide.



HWG-1000 Servo Vibration Block Making Machine 





Brief Introduction
 
HWG-1000 block making machine,using servo motor vibration, it is more energy saving and the response speed is faster. With imported vane pump and hydraulic valve make the equipment run stably and the forming speed faster, which can greatly reduce the cost of brick making.The special vibration and feeding system of this machine can meet the demand of different blocks production for customers,like Hollow block, Solid block,grass-planting paver, curb stones, slope-protect bricks, inter-lock blocks and so on.

Features of HWG-1000 Automatic  block making machine:

Vibration Table System 

Vibration table consists with dynamic table and static table. When vibration starts,dynamic table vibrate,static table remain static,so all the vibration will be focus on the dynamic table;
The vertical vibration made by eccentric vibration shaft will guarantee the quality and density of concrete products.
And vibration table placed on rubber spring could greatly reduce noise around 10~15 decibel and avoid damage to machine;

Servo vibration system
Design- The rotor of a servo motor has a permanent magnet and can self generate and recycle-saving at least 25% energy
Use less current-Servo motor of 12 kw only uses 35-38 amps vs normal motor using 46-50amps
Control- Servo motors closed loop control use no current at idle, standard motors open loop control uses current resulting in a huge saving

Hydraulic system 
The double vane pump is world famous brand "Albert" to coordinate Japanese "Yuken"Double proportional valve,the vibration amplitude and frequency could be adjusted freely. With proportional valve, the flow and pressure of each movement could be adjusted on touch panel according to actual situation;Through the double proportional valve,different actions can be completed  simultaneously so as to save the cycling time thus the production capacity can be greatly improved.

PLC Control system
The PLC in Control system adopts world famous brand Mitsubishi or SIEMENS ,Touch panel use FLEXEM or SIEMENS, Easy operation,low failure ratio, machine running stability and high reliability, convenient for machine maintenance and troubleshooting.
The Sensor Light showing each movement of block making machine being installed in the operation panel of PLC control cabinet,easy to monitor each movement of block making machine and easy for maintenance.

Moulds 
Hard-wearing mould boxes and tampers are precision made to customer specifications,all the moulds under quenching and heat treatment. The surface rigidity of the steel can reach to 58-62HRC ensure the service lifespan reach 100,000 cycles.







Technical specification of HWG-1000 Servo block making machine :

Main Technical Specifications for HAWEN HWG-1000 Block Making Machine
Production per Mould:	10 pcs/mould (Standard Block: 400x200x200mm)
	12 pcs/mould (Hollow block:400x150x200mm)
	24 pcs/mould ("H" shape paver: 200x160x60mm)
	28pcs/mould(Zigzag shape Paver:225*112.5*60mm)
	36 pcs/mould (Rectangle Paver: 200x100x60-80mm)
Cycle Time:	15-20 seconds
Production per Shift (8 Working Hours):	Hollow Block (400x200x200mm): 15,000~16,000 pcs
	Hollow Block (400x150x200mm): 17,000~19,000 pcs
	"H"shape Paver (200x160x60mm): 28,800~38400pcs
	Zigzag shape Paver(225*112.5*60/80mm): 40,000~50,000pcs
	Rectangle Paver (200x100x60-80mm): 52,000~69,000pcs
Vibrating Frequency:	50 HZ
Motors Power:	51KW For Main forming machine parts only
Machine Dimensions:	9800x2300x2800mm
Pallet Size:	1100x950mm or 1200x900mm
Gross Weight:	About 12T
Raw Materials:	crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes
Applied Products:	concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
Applied Fields:	widely used in buildings, road pavings, squares, gardens, landscaping, city constructions

Hollow block, Interlocking Paver made by our HWG-1000 Servo vibration block making machine at site .
Concrete batching machine: PL1600-III with three storage bins.
Concrete Mixer:   MP750 Vertical Planetary Mixer upgradable to MP1000(1000L)
Pallet handling system,with automatic pallet provider included and Automatic Block Stacker included,which can stack the block with double stacks upto 6 pallets each transfer.


General information for factory:

Workers Number:  5 Workers
 1 Wheel Loader driver to load the raw material into Batching machine;
 1 Operator to control the PLC cabinet, when set the control to Auto. mode, this operator is Free,the same one can drive the Forklift to feed the pallet into pallet provier.
 1 Forklift drivers to take the Fresh block to curing yard.
 1 supervisor to check the whole plant.
 1 labor to feed the cement into hopper mixer if using bag cement.
 

Factory Area : 4000-5000m2 (1~1.5 acre)
Workshop Area: 500m2
Pallet Number for HWG-1000 automatic block making line: 1500 pallet
Hawen Machinery Factory supply PVC Pallet, fiber (GMT) pallet and Bamboo pallet. 

PVC Pallet and GMT Pallet are recommended.

Power Consumption: 100-120KW


Packing&Shipping
The whole plant requires 2x40HQ Container,without cement silo and pallet.
1500pcs of  GMT Pallet requirex another 2x20ft container.

 

Container loading in workshp for customers overseas 








Application:

 Our workshop ,located in Quanzhou City,Fujian Provice 




FAQ


1. How many square meters required to set up a block factory?  
Answer: Generally,the whole factory requires 5000 square meters, including the recommended workshop to cover the equipments at 500 square meters,equipments are suggested to keep under the shed.

2. What kind of material can be used to produce concrete block? 
Answer:Crushed stone(Max.10mm),sand and Cement as raw material, coal fly ash, cinder, slag,gangue, gravel, and other industrial wastes.And if customer makes the top colored paving stone,then the face material of fine sand and white cement and pigmen are required.

3. Can I get the warranty for the machine?
Answer:The warranty for the machine is one year after installation or 15 months after shipment,whichever comes first.Spare parts will be sent to customers for free of charge during the warranty period. Warranty does not cover the wearing parts, in cases of incorrect handling, improper user, insufficient maintenance, unauthorized service or modifications to the machine, normal wear .
 
4.What is the delivery time?
Answer:The delivery time is 30-40 days upon receiving the down payment and mould drawing approval from customer.

5. What about your payment terms?
Answer:T/T and L/C are acceptable.
Generally,it requested to pay 30% as depoist by T/T before production, and the balance to be paid by T/T or Irrevocable,Confirmed LC at sight before shipment.

6. How to prepare the foundation for the equipments?
Answer:The foundation drawing for the whole plant will be provided within 07 days after the order confirmed,customer could prepare the foundation construction according to the drawing provided.


7.How about the installation & commissioning ?
Answer: After the equipments arrive customer's site,and the preparation for the foundation,water & electricity are ready,we will send 1 of our technician for the installation & commissioning,the technician will train customer's staff for the operation and maintenance of equipment.


8. How about the installation cost?
Answer:We will send our technician for the installation,customer should responsiblefor all the expense and the allowance of our technician. 

9. Are the machine be tested in your factory before shipment?
Answer:Yes all of our machines will be tested in our workshop before container loading.You are warmly welcome to do the inspection before shipment.

10.Can I visit your factory before placing the order and where is your factory ?You are Answer: Warmly welcome to visit our factory any time.Our factory located in Quanzhou City,Fujian Province.
The nearest airport to our factory is Jinjiang airport,which is 30 minutes to our factory by car.
How to come to your city?
You could take the international flight to Guangzhou airport first,then take the domestic flight from Guangzhou airport to Jinjiang airport,we will pick you up from Jinjiang Airport.
Or take the high speed train From Guangzhou South to Quanzhou train station.



Trust us with your project, we will provide the Optimal Concrete Products Making Solution for you all the time.

Welcome to contact our sales team: 

Sales email: [email protected]
 
Sales line: [phone]